Partial whirlybird / 4in1 tutorial

I've wanted to make a whirlybird pendant for a long time but I didn't have the right size rings for the marbles I picked up. I was thinking of using dice but I wanted the shimmer of the marble. For those of you who don't know what a whirlybird is...--------->

Anyways, I decided to go ahead and make it with what I did have... everything but the right size middle ring.

Because this involves a 4in1 pattern, I'm going to show that to you also and then add an extra blog after this one of just the 4in1 later so someone can google just that.

What you will need for my partial whirlybird

12 small rings
3 medium rings (open)
3 large rings (open) (by the way, this is optional, you can do it all in medium rings if your marble will fit in that)
1 marble

To show size ratios

Thin ribbon

To show how I set everything up before I get started

Now we begin the 4 in 1

Take a medium (open) ring. Add 4 small (closed) rings to it, then close it.



Take 2 of those rings and open them to where they mirror each other. So if the bottom one is under in the middle, the top one should be under the medium ring in the middle.

Take a large ring and put it down into the bottom small ring and then have it come up through the top small ring. Now add two small rings to that one before you close it. Then fold the new small rings over the rings you just connected the large ring to. They should overlap.

Repeat the same process you just did with the large ring but this time with a medium ring. Make sure you add two new small rings to it before you close it. Repeat alternating large and medium rings in this process until you've used up all your rings. The strand you end up with should have the middle rings overlapping one way and the small rings overlapping the opposite way.


 Now comes the hard part. We have to connect the two ends. Whatever way you do that, make sure that last large ring overlaps the medium ring on the other end. What works best for me is to loop it around my pointer finger and still doing the down through one purple and up through the other.

Roll it over your pinky to inspect it.

You've made it to the fun part!!! Put the marble in the middle. And if you've used the right sized rings, you should have to work it into the middle. If it goes in so easily it falls out the other side without a push, you need to lose one of the larger rings and two of the smaller rings. 



You have two options now. You can either leave it like this and use super glue or nail polish around the edges to hold the marble in place. OR you can make a really easy necklace out of this by following the next few steps.

Take your ribbon and put it through the middle of one of your small rings. Continue to put it through the rest of this circle (around the marble). When you get to the last ring, put it through the middle then cross your strand of lace over to the other side. Loop it through just like you did the first time, get to the center, and double knot it. If you've left enough ribbon on both sides, you can now tie it around your neck for a necklace.



Here's what I ended up with
And it's awesome because you shine a light on it and it goes all Iron Man heart thing.


I made this one with an easy hook and eye clasp and it's up on Etsy for 8$

The glow on a black table

I apologize

I'm sorry for the lack of posts. I started my job as a mail carrier two weeks ago and I'm at the point where I'm carrying by myself without a trainer. I'm a bit stressed when I get home and honestly I've just been going to bed. Being an adult is wayyyyy too much of a mind game sometimes. My brain needs a nap mid day :( But my mother-in-love is coming out this weekend so I'm going to show her how to do some crafts on Sunday and if I get home earlier than 7 the rest of the week. I'll post up how to make chainmaille crosses while she's here

And now for funny diver faces.

How to- Hidden hook and eye with bead

A big issue I have with some of my work is the clasp. Which clasp do you use? Will it work for the person wearing it? Will it make you become one of those people that constantly asks for help with putting on or taking off jewelry? Will it completely ruin your piece? So what I'm finding is the more I can hide it, the better.
And here's where knowing how to use wire comes in. You have unlimited hook and eye options. You can even make fun swirly hooks if you want that look like art on your art.
Now lets look at me. I'm smart but not crafty smart. So when I figure something out craftwise, you guys better friggin act like I'm a genius or I quit! Just kidding but honestly I just assume you all think I'm the greatest.
So here's a tutorial on something that has probably been done time and time before, but I've never seen it: Hook and eye with paper bead.

For this, you need
1-2 beads with a wide hole. It depends on if you're doing both the hook and the eye.
20g wire
Wire cutters
Round nose pliers (Optional are the multiuse 4in1 kinds. They're very much worth the investment)

For the Hook
Grab your spool of wire. Depending on the size of your bead, you're going to probably need about 5 inches, but don't cut that much off yet. Just put the bead on it and the spool will hold it on there so you don't have to worry about where you set it.

Take the top inch and bend it over the top round part of your round nose pliers. When bending, make sure you bend so that you are losing length on the coil, not on the inch you're bending. This should make a loop and the end of your wire should be pointing down towards your spool of wire now. If you have the 4 in 1 round nose pliers, use the tiny wire slot to crimp this loop together, all the way to the top. If you don't have the 4 in 1's you can do this by hand. But it turns out better with using the wire guide on the 4in1. You can also twist this part to kind of make it interesting. The main focus is that you have a very very small loop at the top instead of a wide open one.
 

Using the round nose pliers again, roll this loop over it to make your hook. The more closed it is, the better the jewelry will stay on but the harder it is to put on or take off. This side of the hook is done, but now you have to finish the other side.

This is optional but... at the base of the hook, bend up just a little. This will make sure the bead doesn't slide into the hook and #1 throw off your measurements and #2 block the eye from going into the hook.

Slide your bead up towards the hook. It should be sliding over two wires now. If after sliding the bead up you still see two ends of wire, slide the bead back down and trim off some of the wire you had initially bent down. You want the bead to be over it but you don't want it showing out the bottom of the bead.

Now you get to cut all of this off the spool. Measure about a pinky tip length under the bead and cut there. Using this extra wire, roll it on the round nose pliers (I start about midway up on the pliers) and roll it till this loop is closed. This is where the rest of the necklace attaches. If that loop is too big or it doesn't touch the edge of the bead you can cut a little off the end of the loop and continue rolling. But when you measure and cut this, make sure the bead is not up so far on the hook that you can't slide something in the opening of the hook.
Optional: You an use pliers to tip this loop to make the whole thing a straight line or you can leave it rolled in... I added pictures because I know what I just wrote made no sense.Mine are straightened, the other ones will look like it's literally just curled at the edge of a straight line.

For the eye:
It's actually pretty similar. Grab the spool of wire and put the bead over the edge of it. Bend down the top inch like you did in the hook. But instead of crimping it all the way to the top, you leave the loop open enough that your hook will fit into it and wide enough that the bead won't slid off of it.

Slide your bead up over both wires, making sure the end of the two inches initially bent down doesn't come out from under it. Trim it if needed.

Cut about a pinky tip extra under the bead and roll it with your round nose pliers like you did with the hook. Where this becomes optional is if you want this loop opening to be in the same direction as the eye or twisted.



For my project, I only needed hooks.
Remember the little bear beads we had as kids where the top of the head had a knob of plastic coming out of it and a hole in the bottom of the bear so you could attach the bears to each other?
That's what inspired this one.
This a hook multi-use.
It is sold on Etsy as a set of 50 hook beads and a pair of earring hooks.
The color choices are red, orange, yellow, green, blue, purple, and pink tiger beads. I will make whatever variety of those you choose. So if you want 20 red, 17 green, 3 blue, and 10 yellow, that's what you get. They are great for making bracelets, anklets, necklaces, or even earrings.




The set is 20$ here!

Blue tiger beads- paperbeads

I'm really liking the paper beads thing. It's a cheap gift I can pretty much give anyone, but it's "special" cheap. All the beads take time and thought and more time. Yes, they're extremely time consuming.
Measure the paper, line it, decorate it (if that's one of your steps), cut it, roll it, glaze it, glaze it again, and for my projects... add the wire mount.
But if I want to send my niece a nice cute couple of stretch bracelets... we have to admit it my be cheap, but it's hours of love.
The other day, I was at a dollar store looking for some stationary paper with a fun repetative print I could use for the beads. I love the magazine ones but I wanted something a little more repetitive. I found one with purple flowers all over it. It  was cute. So I had 40 sheets of stationary (they call it computer paper but it's so thin my imaginary printer would have eaten it and still not clogged up) paper for 1$.
I planned on making half inch beads. The paper was 11" high so that's 11x2=22 strips. Each strip is cut diagonal into a triangle so there's actually 2 beads made out of every strip. So that means 44 beads per piece of paper. After 44 beads and not taking into consideration the border of the paper was the color I wanted, but not the middle (made 38 light light purple with a thin dark purple strip down the middle, 2 upper half dark purple and lower half light light purple, and 4 dark purple), I was pretty much done with that paper.
But I still had 39 pieces of paper to go.
Out of curiosity, I pulled out my kids washable markers and scribbled all over the white side of the paper, then cut it up like I did with the previous beads, then rolled them up. Because the markers were washable, the glue actually made the colors bleed into each other when I went to roll them. I LOVED how they turned out.
I had previously watched a video on how to color beads and the girl said it pretty much doesn't matter what you color the inside of the triangles. It's the color on the outer edges that counts. I knew I wanted two colors but I didn't want to take the time to color edges of triangles and scribbling didn't cover all of the edges.
That's when I decided to measure out my triangles using markers to sketch the cut lines. Then I drew lines in a darker color vertically across the paper. It ended up with some pretty awesome blue tiger striped beads.
I'm gonna show you how to make them now that I wrote a book on how I found out how to make these.

You need
1 piece of white paper
A package of washable markers (preferably with thick tips)
A ruler
Scissors
Elmers glue
Diamond glaze or clear nail polish
Toothpics
Bead roller is optional but I think the toothpicks did a wonderful job. 

Grab your sheet of paper. Going up the tall side of the paper, make a mark at even lengths using the main color choice of your bead. I chose every 1/2 inch. Do the same thing on the opposite side. If there is a portion of the paper that is not long enough, mark it so you don't cut it. (Third picture)

The bottom of the paper does have to be lined because this part will show on your first bead. Just line it with a thick line of marker the color you want your beads. I made my lines maybe 1/8 of an inch wide. The easiest way to do it is get a thick tipped marker. Now line from the bottom corner to the opposite side's first mark. From that mark, line to the first mark on the other side. Continue in this pattern till you have a zig zag up the paper.  Because these are washable markers, some wet color may stick to the ruler. As you move the ruler up the paper you could get streaks like I had. These don't mater because it's only the edges of the triangle that you'll see and you want your paper to be that color anyways.

The stripes on your paper will have to be darker than the main color of the bead if you're going to do this the way. I chose black. If you want camo beads, do a green base with brown and black as your stripes. To make the stripes, you just go down the paper in lines vertically with that color.


Now for the part I hate the most... cutting. When you cut, cut right in the middle of your blue line. This way there is blue on both sides because you need blue on both long lengths of the triangles. If you cut too deep into a line and don't have enough blue on one side, just quickly add a little blue there. Not a lot is needed though because as you roll the bead, only a little of each level will show. Halfway through the paper I was done lining so I only had to cut 24 ;p


Now you get to roll the beads. I used a toothpick to start but after about 3-4 rolls I slipped it off the toothpick and held the edges to roll it. I just found it easier. But you can keep it on the toothpick if you want. As you roll, make sure the the paper is in the middle as you roll it or you will have a very lopsided bead.
(I had to get the picture of Dr. Rizzo in there.)

When you get to the end of the bead, put a dab of glue on your finger and roll it over the thin end in the middle of your bead. How faded you want this bead is how much glue you use. I used enough to cover the whole  bead on a few of them and the rest I used just enough to cover the middle. Because the markers are washable and the glue is liquid, where you roll the glue will fade a little depending on how much you rub the glue there. But don't worry, the blue won't come fully off. It will just be lighter there. And if this makes the whole bead too light for you, let it dry and do the glaze on this one. The glaze will make it darker but it's better to know now than to do the whole batch this way and end up with 40+ beads you don't want. Also, please remember to wash your hands. The glue also picks up the color and gets it all over your fingers. Thank God for washable markers!

The beads in the above picture have not been glazed yet. You will see the difference in color after even just the first glaze. Your beads will not turn out that white... unless you went crazy with the glue.
Now for the glazing process. Again, I used clear nail polish. I still can't find the diamond glaze in stores here. In case you didn't see my other "paper bead how-to", this is where you use the toothpicks the most. They hold the bead up while the glaze is drying.
After the first glaze... Seeeeee, not so white. Sorry the other beads are in there also. I had just done their second glaze. And the foam under it is a Halloween tombstone I got at the dollar store.. holds a ton of beads up for me :) High five for being thrifty cheap!
And after the second glaze... Some of the beads sit on the top of the toothpick because I hand roll. If you keep it on the toothpick while rolling, some may slide on you. In this case, put a little polish on the toothpick under the bottom of the bead. It will hold the bead up but not permanently keep the bead on the toothpick.

Now for the final result after blinging them out with wires...

Available on Etsy here

  

 
If you want to know how to make the hidden clasp like this, let me know and I'll message you about it. It will probably be another how to later on. :) Extremely easy to do.